A metal roof cost calculator can help estimate installation costs by roof size with no climbing required. Some contractors may charge by what are known as roof squares; one roof square is equal to 100 square feet of roofing material, such as shingles, tiles, or metal panels.
Of course, the first tip for installing a metal roof is to have a professional perform the task. However, should you choose to tackle the project on your own, there are a few things to consider and metal roofing how-to tips to know before and during installation. Compared to other roofing materials, metal roof maintenance is very minimal. Luckily, the upkeep needed to maintain a standing seam metal roof is minimal, especially if the roof was correctly installed. That being said, you shouldn’t overlook performing regular maintenance on your metal roof, as it could make or break a system, especially if a serious problem exists. We don’t recommend a do-it-yourself installation for metal roofs. Get an idea of how much metal roof installation costs based on the table below.
Metal Roofing Maintenance: How to Best Care for Your Metal Roof
The more material there is to dispose of, the higher the cost will be. Steel is a cost-effective choice with an average price range of $3 to $4.50 a square foot.
For galvanized roofs, try Valspar’s Metal Building Siding and Roof Finish, an acrylic paint meant for metal roofs on outbuildings, barns and sheds. A roof that is more slanted requires more materials, more installation time, and more safety measures for contractors. With good maintenance, some metal roofs can last as long as 100 years.
Read more about Metal roofing contractor in Utah here.
However, this roof will last at least twice as long, and will require minimal maintenance. In the short run, traditional shingles are a very budget-friendly option, with prices starting as low as $3 per square foot installed. These are 3-tab shingles, that look flat and last only about years, sometimes even less. For many homeowners looking to replace an old roof, the choice often boils down to metal vs. asphalt shingles. For example, on a complex roof, there will be more waste if you want to install standing seam panels, than if you install metal shingles or tiles. Home Depot has a very large selection of various types of metal panels, sold in sheets.
With a roof deck, underlayment, and insulation in place, a metal roof is silent when it’s raining because its full roof structure reduces reverberation and noise. The more textured a sheet of metal roofing, the less noise it creates. By the same token, a metal roof that has come to the end of its service life will not end up polluting our earth in the landfills.
Read more about Commercial metal roof benefits here.
Another benefit of metal roofs is that they are so energy efficient they can save you money in monthly heating and cooling costs. These days, you’ll see metal roofing that suits less rustic, more refined, and modern structures, from contemporary homes in California to coastal communities on the East Coast. Metal comes in a spectrum of colors and finishes, and in shingle, slate, and shake styles. Because you can likely get the look you want from either metal or asphalt shingles, don’t let appearance be the deciding factor; instead, choose the material that will perform best for you. For decades, asphalt shingles have been known for their reliability, cost-effectiveness, and ease of maintenance, and asphalt roofs are on about 80 percent of U.S. homes.
The following are some tips to consider when homeowners are calculating a budget for a seamed metal roof. Since it can be recycled and used over and over again, zinc is also an environmentally friendly option. Finally, with its long lifespan of up to 100 years, zinc is a great choice for those looking for a long-term roofing solution. A metal roof made from zinc costs between $4 and $15 per square foot. A standing seam roof installation can be more expensive if the roof is challenging to get to, for example if it is steep, high, or otherwise difficult to access.